Choose the right industrial vacuum floor kit based on the material on your floor, the diameter your vacuum supports, and whether the application requires a conductive accessory path for combustible dust housekeeping.
Optional sizing 1.5″, 2″, and 2.75″ floor-cleaning setups using the correct S-pipe, brush, or squeegee so the full assembly fits the vacuum and the job.
These 1.5″ floor kits are built for standard industrial cleanup where combustible dust compliance is not required. They are a strong fit for tighter cleanup areas, lighter debris loading, and daily floor maintenance where operators want more control from a smaller-diameter setup.
| Component | SKU | Diameter | Best For | Type | NFPA 660 Compliant |
|---|---|---|---|---|---|
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00640 | 1.5" | Floor tool connection and operator control | Wand / Pipe | No |
|
Floor Brush (Bristles) Dry cleanup tool |
P13597 | 1.5"–1.6" | Dust, fines, and dry floor debris | Bristle Brush | No |
|
Floor Brush (Squeegee) Wet cleanup tool |
P13596 | 1.5"–1.6" | Liquids, wet residue, and floor recovery | Squeegee Brush | No |
These 2″ floor kits are built for standard industrial cleanup where broader floor coverage and higher flow make more sense. They are the better fit for wider passes, heavier debris loading, and cleanup zones where throughput matters more than compact maneuverability.
| Component | SKU | Diameter | Best For | Type | NFPA 660 Compliant |
|---|---|---|---|---|---|
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00649 | 2" | Floor tool connection and operator control | Wand / Pipe | No |
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00829 | 2.75" | Floor tool connection and operator control | Wand / Pipe | No |
|
Floor Brush (Bristles) Dry cleanup tool |
P01040 | 2" - 16" | Dusts | Bristle Brush | No |
|
Floor Brush (Bristles) Dry cleanup tool |
P01042 | 2" - 20" | Dusts | Bristle Brush | No |
|
Floor Brush (Bristles) Dry cleanup tool |
P01043 | 2.75" - 20" | Dusts | Bristle Brush | No |
|
Floor Brush (Squeegee) Wet cleanup tool |
P01036 | 2" - 16" | Liquids | Squeegee Brush | No |
|
Floor Brush (Squeegee) Wet cleanup tool |
P00834 | 2" - 20" | Liquids | Squeegee Brush | No |
|
Floor Brush (Squeegee) Wet cleanup tool |
P01038 | 2.75" - 20" | Liquids | Squeegee Brush | No |
These 1.5″ floor kits are built for applications where the accessory path must be matched to combustible dust requirements. The hose, wand, couplings, and floor tool should be specified together so the full assembly aligns with the vacuum and the application.
| Component | SKU | Diameter | Best For | Type | NFPA 660 Compliant |
|---|---|---|---|---|---|
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00640 | 1.5" | Floor tool connection and operator control | Wand / Pipe | Yes |
|
Floor Brush (Bristles) Dry cleanup tool |
P13597/EX | 1.5" - 1.6" | Dusts | Bristle Brush | Yes |
These 2″ combustible dust floor kits are built for larger-scale floor cleanup where the application requires a conductive-grounded accessory path. This section should clearly separate regulated combustible dust configurations from standard kits so buyers can identify the correct setup fast.
| Component | SKU | Diameter | Best For | Type | NFPA 660 Compliant |
|---|---|---|---|---|---|
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00649 | 2" | Floor tool connection and operator control | Wand / Pipe | Yes |
|
"S" Pipe / Double-Bend Pipe with quick coupling |
P00829 | 2.75" | Floor tool connection and operator control | Wand / Pipe | Yes |
|
Floor Brush (Bristles) Dry cleanup tool |
P01042/EX | 2" - 20" | Dusts | Bristle Brush | Yes |
|
Floor Brush (Bristles) Dry cleanup tool |
P01043/EX | 2.75" - 20" | Dusts | Bristle Brush | Yes |
