2.4 kW | 3.3 HP
5,500 in²
26 gal
The M100 JC® is a single-phase fine dust industrial vacuum built for production-floor cleanup, powder recovery, machine-side debris pickup, and wet/dry industrial maintenance tasks. Powered by three independently controlled by-pass motors, the M100 JC delivers up to 326 CFM of airflow and 98 inH2O of vacuum performance from standard 110V / 60Hz power.
For fine dust collection, the M100 JC uses a large 5,500 in² PTFE Class M cartridge filter designed to help maintain airflow under dust load. The JetClean® filter cleaning system uses pressure differential to send a cleaning pulse through the cartridge, helping release built-up dust from the filter surface without requiring the operator to fully stop work.
A tangential inlet helps create a cyclonic effect inside the vacuum body, slowing incoming dust and debris before it reaches the filter. Collected material drops into a 26-gallon detachable steel bin mounted on four reinforced swiveling wheels, making disposal easier during routine plant cleanup. For applications that require direct bagging or more controlled dust disposal, review the M100 JC LP version.
The M100 JC is a strong fit for fine dust, dry powders, chips, shavings, light liquids, and general production debris in ordinary industrial environments. For combustible dust, reactive metal powders, classified locations, or applications requiring contained Longopac® disposal, confirm the proper Depureco configuration before quoting.
The M100 JC uses three independently controlled by-pass motors, allowing the operator to adjust suction performance based on the material and cleanup task. The motors are housed in a durable steel head assembly with sound-dampening insulation to support lower operating noise during plant-floor use.
The M100 JC is equipped with a 5,500 in² PTFE cartridge filter certified as Class M according to EN 60335-2-69 / IFA-BGIA M-PES. The large filter surface area helps maintain airflow during fine dust recovery, while the PTFE media supports better dust release during filter cleaning. Optional HEPA H13 filtration is available when the application requires a higher-efficiency secondary stage.
JetClean® uses the pressure differential between the inside and outside of the vacuum to send a cleaning pulse through the cartridge filter. This helps dislodge fine dust from the filter surface, maintain suction performance, and reduce downtime during high-dust cleanup tasks.
Collected material drops into a 26-gallon painted steel container with a metal release handle. The bin detaches from the vacuum body and rolls on four reinforced swiveling wheels, making it easier to move and empty during routine production-floor cleanup.
H13 Absolute conical Filter (EN 1822)
H14 Absolute Filter (EN 1822) Glass fiber
Accessories basket
Get answers about using the M100 JC for fine dust and powder recovery, production-floor cleanup, JetClean filter cleaning, Class M and HEPA filtration, wet/dry applications, model comparison, and choosing the right industrial vacuum for demanding dust recovery.
The M100 JC is a high-capacity single-phase industrial vacuum designed for fine dry dust, powders, production debris, and demanding plant-floor cleanup where strong suction, large collection capacity, and frequent filter cleaning are important.
Three independently controlled bypass motors provide up to 326 CFM of airflow and 98 inH2O of maximum vacuum through a 2.75-inch inlet.
The M100 JC uses a PTFE-coated Class M conical cartridge together with Depureco’s JetClean filter-cleaning system. This combination is designed to help maintain airflow when recovering fine, filter-loading dust.
A 26-gallon detachable collection bin provides substantially more capacity than smaller compact fine-dust vacuums, making the M100 JC well suited to manufacturing, machine-side cleanup, powder recovery, production-floor housekeeping, and other recurring industrial dust-recovery applications.
The M100 JC is designed primarily for fine dry dust, powders, chips, shavings, and other suitable production debris generated during manufacturing and industrial maintenance.
Its combination of 326 CFM airflow, 98 inH2O vacuum, a large collection bin, and JetClean filtration makes it useful for both fine filter-loading dust and general machine-side cleanup.
The M100 JC can also be configured for wet pickup with an optional liquid-recovery bin equipped with a floating device. Wet recovery should therefore be treated as an available configuration rather than the primary purpose of the standard fine-dust setup.
Filter and construction options should be selected around the material being collected. Fine or difficult dust may require different filtration, while combustible dust, reactive powders, hot material, hazardous substances, or classified-location applications require separate equipment and application review.
The standard M100 JC should not be treated as automatically suitable for a hazardous dust application simply because HEPA or grounding options are available.
The M100 JC uses a PTFE-coated Class M conical cartridge designed for fine dust and powder recovery.
Depureco’s JetClean system uses the pressure differential between the inside and outside of the vacuum to send a cleaning pulse through the cartridge. This helps release accumulated fine dust from the filter surface so airflow can be restored without removing the filter for routine cleaning.
JetClean is particularly useful in applications where fine powders repeatedly load the filter and would otherwise reduce suction performance during cleanup.
The current U.S. configuration also provides two higher-efficiency filtration paths. An H13 absolute primary filter with PTFE membrane is available as an alternative primary filtration configuration, while an H14 fiberglass filter can be added as a secondary absolute filtration stage.
H13 primary filtration and H14 secondary filtration perform different roles and should not be treated as interchangeable names for the same filter.
Choose the M100 JC when fine, filter-loading dust and frequent filter cleaning are important. Choose the standard M100 when general industrial dust and solids recovery can be handled with a conventional polyester star filter and manual filter cleaning.
Both models use three bypass motors and provide up to 326 CFM of airflow and 98 inH2O of maximum vacuum. Both also provide a 26-gallon detachable collection bin.
The main difference is the filtration and cleaning system.
The M100 JC uses a PTFE-coated Class M conical cartridge with JetClean filter cleaning, making it particularly well suited to fine powders and dust that can quickly load a conventional filter.
The standard M100 uses a larger polyester Class M star filter with manual filter cleaning and offers a broader range of optional filter media and configurations.
The correct choice therefore depends more on dust characteristics and filter-cleaning requirements than on suction performance or collection capacity.
The M100 JC may not be the best choice when the application requires contained continuous bagging, continuous-duty three-phase operation, substantially greater material capacity, or equipment specifically configured for combustible or hazardous dust.
If reducing operator contact with collected fine dust during disposal is a priority, the M100 JC LP uses a Longopac endless-bag collection system instead of the standard M100 JC’s detachable 26-gallon bin.
Applications requiring continuous operation for long production cycles may be better served by a three-phase industrial vacuum with a side-channel blower rather than the M100 JC’s bypass-motor platform.
The standard M100 JC should also not automatically be considered suitable for combustible dust, reactive powders, or hazardous classified locations simply because HEPA filtration, grounding, or other options are available.
Final selection should consider the material, dust volume, disposal requirements, duty cycle, hose configuration, filtration needs, available electrical service, and any applicable dust or facility hazards.
