Search
CONFIGURED PRODUCT KIT

RAM 280 MP CNC Sump Cleaning Pro Kit

$13,898.00

Complete CNC sump cleaning package built around the RAM 280 MP for recovering coolant, cutting oil, metal chips, swarf and sludge from machine tanks. Includes the 74-gal RAM 280 MP sump vacuum and 2-in Oil & Swarf Pro Kit for machine-side cleanup, solids separation and liquid recovery.

Vacuum + Pump-OutSimultaneous
Liquid Capacity74 gal
PRO KitTools Included

Configuration review included. Your application, material, delivery and compliance details are reviewed before the order is finalized.

SEE IT IN ACTION

See This Kit at Work

Watch the system in operation, then review the applications, materials and operating context this package is designed to support.

APPLICATION FIT

Use the fit data below as a quick check before reviewing the full workflow and technical details.

Recommended Industries

CNC / Metalworking

Applications

Metal Chip RecoverySwarf RecoveryCoolant RecoveryOil RecoverySump CleanoutTank Cleaning

Materials

Metal ChipsMetal SwarfCoolantOilSludgeLiquids / Solids Mix
PROCESS

How It Works

01

Configure for the Cleanup

Connect the 2-inch Oil & Swarf PRO hose and pickup tool that best fits the sump, machine interior or floor area. Use the metal sieve basket alone for larger chips and swarf, or add the washable 150-micron liquid filter when finer particle capture is needed.
CNC sump vacuum recovering coolant and metal chips from a machine tank
02

Vacuum Coolant, Chips & Sludge

Recover coolant or cutting oil together with chips, swarf, fines and settled machining sludge. The RAM 280 separates solid debris as material enters the system while the 74-gallon tank provides substantial liquid-recovery capacity.
metal chips
03

Filter & Discharge While You Vacuum

Keep vacuuming while the external pump transfers separated coolant out of the RAM 280. Pump into a drum or holding tank during a full sump cleanout, or discharge directly back into the CNC tank during quicker maintenance cycles that focus on removing chips, swarf and settled debris.
04

Return Recovered Coolant

For a deeper tank clean, stage recovered coolant in a drum or in the RAM 280’s 74-gallon liquid tank while the sump is cleaned. When the tank is ready, place the suction hose into the recovered-fluid container and use the discharge system to transfer the coolant back into the CNC reservoir.
PERFORMANCE & DESIGN

Performance & Key Features

Review the machine features that drive performance, capacity, filtration, recovery and day-to-day operation.

single phase
01 Base Machine Feature

Suction Unit

The suction power is generated from three by-pass motors within the vacuum system. Each motor is individually controlled by its own switch, granting the operator precise control over the intake performance. Housed within a robust casing, the motors are accompanied by an insulating sponge to effectively reduce noise levels, creating a quieter working environment.

Filtering Element
02 Base Machine Feature

Filtering Element

The gathered liquid passes through a PPL filter with a 150µ efficiency, which enables the separation of even the tiniest solid particles. This process ensures that the filtered liquid becomes suitable for reuse. The filter is designed to be easily washed and reused. Additionally, there is an alternative disposable TNT filter with a 100µ efficiency that is also available.

Pivoting Inlet
03 Base Machine Feature

Pivoting Inlet

Enhanced for effortless maneuverabilit. Move around freely without twisting th sump vacuum.

Discharge System
04 Base Machine Feature

Discharge System

To discharge the tank, the vacuum features an externally mounted pump, maximizing the container's full capacity and guaranteeing thorough emptying without any residue.

APPLICATION PROOF

What Can It Handle?

Review material and application demonstrations that show how the system is used in real industrial cleanup, recovery and production-support work.

Industries

CNC / Metalworking

Applications

Metal Chip Recovery Swarf Recovery Coolant Recovery Oil Recovery Sump Cleanout Tank Cleaning

Materials

Metal Chips Metal Swarf Coolant Oil Sludge Liquids / Solids Mix
Application Proof

Material & Application Videos

What's Included

Everything included with this package, including the base machine, tools, accessories and application-specific configuration.

ram 280
00 QTY 1
Base machine in this CNC sump-cleaning package

RAM OIL 280 MP Sump Vacuum

74-gal CNC sump vacuum with 326 CFM airflow, 98 inH₂O vacuum, an internal sieve grid basket and external liquid-discharge pump. Built to recover coolant or cutting oil together with chips, swarf and machining debris during sump cleaning.

View details
Galvanized steel industrial vacuum scraping nozzle with long rigid tube and flat scraping pickup tip
00 QTY 1
TOOL

2-in Scraping Nozzle

Rigid scraping pickup nozzle helps loosen and vacuum settled chips, swarf, metal fines and machining sludge from the bottom and sides of CNC coolant tanks.

View details
00 QTY 1
TOOL

2-in Oil-Proof Sweeper Nozzle

Wide oil-resistant pickup nozzle helps recover coolant, chips, swarf and wet machining debris across broader surfaces during sump and machine cleanup.

00 QTY 1
TOOL

2-in Flat Pickup Pipe

Rigid flat pickup pipe extends the suction point into narrow sump areas, machine interiors and other spaces where a larger floor-cleaning tool is not practical.

View details
00 QTY 1
Hose / Hose Assembly

2-in Reinforced PUR Suction Hose

Complete 2-in CNC cleanup package with reinforced PUR hose, antistatic cuffs, oil-proof pickup tools, scraping nozzle and floor squeegee.

00 QTY 2
CONNECTION

2-in Antistatic Rubber Hose Cuffs

Flexible antistatic rubber cuffs connect the suction hose to the vacuum and cleanup tools while providing durable, removable connections for repeated machine-side maintenance.

MORE PROOF

More Videos & Applications

Explore additional demonstrations, operating examples and application footage for the linked machine and package.

TECHNICAL REVIEW

Technical Details

Confirm the inherited machine specifications, capacities, filtration and operating requirements before placing the order.

Performance & Power

Motors | Type3x Bypass
Voltage | Frequency110 V | 60 Hz
Maximum Vacuum98
Maximum Air Flow326 CFM
Noise Level (EN ISO 3744)72 dB(A)
Frequency60 Hz
Power2.4 kW | 3.3 HP
Vacuum continuous use98 inH2O
Inlet2 Ø in
Ampere20 A
Power Supply TypeSingle-Phase Electric

Filtration

Filter TypeLiquid Bag Filter
MediaPPL Nylon Polypropylene
Filtering Efficiency150 µm
HEPA OptionN/A

Machine, Capacity & Recovery

Dimensions28 x 57 in
Height56 in
Weight333 lb
Liquids Capacity74 gal
Solids Capacity11 gal

Resources & Documentation

Open the available base-machine documents for deeper technical review.

CONFIGURE YOUR PACKAGE

Options & Add-ons

Explore compatible machine options, upgrades and accessories that can be added based on your application and operating requirements.

PURCHASE PROCESS

Shipping & Ordering

Review kit price, availability, shipping method and the assisted-purchase process before submitting your order details.

Kit Price$13,898.00
AvailabilityIn Stock
Purchase ProcessAssisted Purchase / Sales Review
ShippingCalculated After Order Review

Ships via LTL freight from our Kyle, Texas facility. Additional charges may apply when liftgate service or other special delivery services are required.

Before finalization: our team reviews the selected kit against your material, application, delivery and compliance requirements.

QUESTIONS BEFORE ORDERING

RAM 280 MP CNC Sump Cleaning Pro Kit FAQs

Find answers about what comes with the RAM 280 MP CNC Sump Cleaning Pro Kit, which accessories help remove
coolant, metal chips, swarf and sludge, how liquid separation and pump-out work, electrical and capacity requirements,
model comparisons, and ordering. Use these details to choose the right complete sump-cleaning setup for your machine
shop.

What exactly is included in the RAM 280 MP CNC Sump Cleaning Pro Kit, including the oil and swarf tools?

The Depureco USA RAM 280 MP CNC Sump Cleaning Pro Kit is advertised as a complete CNC coolant sump-cleaning package combining the RAM OIL 280 MP (U.S. code A373/US) with the 2-inch Oil & Swarf PRO accessory set (P12355). The base vacuum supplies the 74-gallon liquid tank, 11-gallon metal-chip separation basket, 150-micron liquid filter and liquid-discharge pump; these are machine features, not extra accessories.

The manufacturer’s P12355 accessory bill of materials specifies a 3-meter reinforced PUR suction hose, two antistatic rubber cuffs, a flat pickup pipe, two metal connectors, an oil-proof conical nozzle, an oil-proof sweeper nozzle, a scraping nozzle, a double-bend floor-cleaning tube, and a floor squeegee. Depureco USA’s live kit page lists most of these tools, but its visible itemized section does not separately list the two metal connectors. Confirm the final packing list and whether discharge-side hose components ship with the base machine before ordering.

Vacuum SKU
A373/US
Accessory SKU
P12355
Accessory Diameter
2 in
Suction Hose Length
3 m
Which tools in the RAM 280 MP Oil & Swarf Pro Kit work best for CNC sump sludge, wet metal chips, swarf, and floor cleanup?

The P12355 2-inch Oil & Swarf PRO set gives an operator several pickup options for different CNC cleanup tasks. Its reinforced polyurethane hose and rubber cuffs make the vacuum-to-tool connection. The conical nozzle and flat pipe provide different access profiles for liquid and machining residue around sump openings or tight machine spaces; the included scraping nozzle can help loosen suitable settled material before vacuum pickup. The oil-proof sweeper nozzle, double-bend attachment, and floor squeegee add options for controlled wet cleanup around machine tools.

Choose the attachment around the actual material rather than the keyword ‘swarf.’ Short wet chips, curled turnings, long stringers, and dense sump sludge can behave differently. Long chips may bridge a nozzle or hose, and hard-packed sludge may need preparation or another collection method. The accessory names and quantities are manufacturer-specified; the suggested task mapping is application guidance, not a published performance test for every material.

Accessory Set
P12355
Nominal Diameter
50 mm
Hose Length
3 m
Tool Families
Nozzles / Scraper / Floor Tools
Will this CNC coolant sump vacuum kit handle wet metal chips, cutting oils, and swarf from mills, lathes, and machining centers?

The RAM 280 MP is intended for compatible mixed liquid-and-solid sump recovery in CNC machine shops. Typical evaluation points include vertical and horizontal machining centers, CNC lathes, milling equipment, and other machine tools that accumulate water-based coolant or cutting oil with wet chips, turnings, and settled machining residue. The sieve-grid basket retains larger solids while the liquid-filtration and discharge stages support coolant handling.

Suitability depends on the material and process—not just the machine type. Steel, stainless-steel, and aluminum machining can produce very different chip lengths, fines, and fluid mixtures. Long stringers may tangle, abrasive fines may demand additional filtration, and heavy sludge can reduce collection rates. Finely divided or potentially reactive materials, including some aluminum, magnesium, or titanium residues, require a separate hazard assessment; the standard RAM 280 MP is not presented as a combustible-dust or hazardous-location certified vacuum. Confirm alloy, particle size, wet/dry condition, fluid chemistry, temperature, and site classification with Depureco before ordering.

Liquid Capacity
74 gal
Chip Basket
11 gal
Suction Inlet
2 in
Can filtered CNC coolant recovered with the RAM 280 MP kit be reused, or does it need more treatment?

The RAM 280 MP can support a coolant-recovery process, but it is not a complete coolant-recycling or treatment system. Its sieve-grid basket separates larger metal chips and swarf, and the manufacturer’s standard liquid bag filter is rated at 150 microns. That filtration can reduce suspended solids before the collected coolant is transferred, but it does not prove that fluid is acceptable to return to a machine.

Before reuse, the maintenance or coolant-management team should evaluate coolant concentration, pH, tramp oil, microbial condition, dissolved contamination, and any machining-specific quality requirements. Fine particles below the filtration threshold may also need a separate treatment stage. The 2026 price list identifies a 100-micron disposable liquid-filter option, but it is not proven to be included in this commerce kit. If your priority is extending coolant life, specify the fluid type, contaminants, required cleanliness, and reuse destination during the kit review.

Standard Liquid Filter
150 µm
Bulk Solids Separator
Sieve-Grid Basket
100 µm Filtration
Optional In Price List
Can the RAM 280 MP vacuum and pump out coolant at the same time, and does this kit include a discharge hose

Depureco’s manufacturer documentation for the RAM OIL 280 MP describes a non-return-valve system that permits liquid suction and discharge at the same time. The U.S. A373/US price list identifies a liquid-discharge pump, and the published RAM 280 MP Pro Kit page describes pumping separated coolant into a receiving drum or machine sump during cleanup. Confirm that the delivered U.S. electrical and pump configuration supports the manufacturer’s simultaneous-operation workflow before relying on it for production scheduling.

The P12355 Oil & Swarf PRO accessory set includes a 3-meter SUCTION hose and cleaning attachments; it does not itemize the pump-out hose. Separately, Depureco’s international RAM 280 MP product listing shows a hose with discharge valve as machine equipment. Because the U.S. commerce-kit contents page does not clearly identify that discharge-side component, verify the supplied pump-out hose, valve, couplings, discharge route and receiving container with Depureco before ordering. Recovered fluid should only be returned to a machine after its condition and compatibility have been checked.

Pump Type
External Discharge Pump
Liquid Tank
74 gal
Suction Hose Supplied with P12355
3 m
What sump size, power supply, and hose reach should I plan for with the 74-gallon RAM 280 MP CNC cleaning kit?

Size the kit around the largest sump, gallons recovered per cleanout, chip-basket loading, number of CNC machines serviced, collection-and-pump-out sequence, and hose access. The RAM 280 MP has a 74-gallon liquid tank, 11-gallon solids basket, and a 2-inch inlet. A larger sump may still be serviced through planned collect-and-discharge cycles; a 74-gallon tank is a holding capacity, not a guaranteed maximum sump size.

For the U.S. A373/US unit, the 2026 price list gives three bypass motors, 2.4 kW / 3.3 HP, 110 V / 60 Hz, listed 20 A draw, up to 326 CFM maximum airflow, and 98 inH₂O continuous-run vacuum. The P12355 accessory kit has a 3-meter suction hose. Pickup performance changes with hose length, bends, lift, and liquid/solids loading. Have a qualified person verify available electrical service and the external pump’s separate or shared power requirements; do not assume every ordinary receptacle is suitable.

Liquid Holding Capacity
74 gal
Solids Basket
11 gal
Electrical Supply
110 V / 60 Hz
Listed Current
20 A
Maximum Airflow
326 CFM
Continuous-Run Vacuum
98 inH2O
How do I calculate the labor, downtime, and coolant savings ROI of a RAM 280 MP CNC sump-cleaning kit?

A dedicated CNC sump-cleaning package may reduce the number of separate steps needed to handle coolant, wet chips, swarf, and sludge. Instead of manually draining a tank, scooping out solids, relocating fluid, and repeatedly moving between tools, an appropriately configured RAM 280 MP setup combines suction, larger-chip separation, liquid filtration, and controlled pump-out. The P12355 Pro accessory set provides pickup and floor-cleaning tools for different parts of the job.

To estimate ROI, measure the current time and labor cost per cleanout, annual cleanout frequency, number of machines, value of the production time lost, gallons of genuinely reusable coolant, disposal costs, and the kit’s ownership and operating costs. Compare those figures against a trial or realistic updated workflow. A valid payback estimate is based on annual net savings divided into equipment investment, not a universal percentage or guaranteed number of minutes saved. Depureco’s CNC sump vacuum ROI guide provides the relevant calculation framework.

Machine Liquid Capacity
74 gal
Liquid Discharge
External Pump
ROI Basis
Facility Measurements
Is the RAM 280 MP Pro Kit better than the RAM 200 MP or RAM 500 MP for cleaning CNC coolant sumps?

Choose by the amount of liquid and chips handled between discharge steps, the number and type of CNC machines on the maintenance route, and the accessories required at each pickup point. In the 2026 U.S. price list, RAM OIL 200 MP provides 52 gallons of liquid capacity and 9 gallons of solids capacity; RAM OIL 280 MP provides 74 gallons and 11 gallons; and RAM OIL 500 MP provides 132 gallons and 11 gallons. The RAM 280 MP is the intermediate-volume option for shops that need more holding capacity than the RAM 200 without moving to a 132-gallon system.

Capacity is not the only decision. Compare maneuvering space, hose reach, fluid viscosity, wet chip and stringer geometry, sludge loading, pump-out destination, electrical service, and which Pro accessories are actually included in each offer. Small single-machine cleanouts may be better served by a compact M100 OIL. Reactive metal fines, combustible dust, hot or flammable materials, and classified areas call for separate engineering/safety review rather than assuming the standard kit is suitable.

RAM 200 Liquid Capacity (2026 list)
52 gal
RAM 280 Liquid Capacity
74 gal
RAM 500 Liquid Capacity
132 gal
RAM 280 Solids Capacity
11 gal
What does the RAM 280 MP CNC Sump Cleaning Pro Kit cost, and how do ordering and freight shipping work?

As of October 12, 2026, the Depureco USA RAM 280 MP CNC Sump Cleaning Pro Kit page lists a kit price of $13,898 and shows the package as in stock. The site uses an assisted-purchase process: submit the kit and your order, delivery, and application details so a Depureco specialist can check that the configuration matches your CNC coolant, metal chips, swarf, sump size, electrical service, and discharge requirements before the order is finalized.

Shipping is calculated after the order review rather than included automatically in the displayed kit price. The page specifies LTL freight from Depureco’s Kyle, Texas facility; liftgate or other special delivery requirements may result in additional charges. Confirm the exact included accessory and discharge-hose components, final price, tax or freight charges, current availability, and next payment steps with the sales team. Submitting the assisted-order information should not be presented as confirmation that the equipment is shipped or the sale is finalized.

Purchase Process
Assisted Purchase / Sales Review
Shipping Method
LTL Freight
Shipping Origin
Kyle, Texas
Freight Calculation
After Order Review
READY TO MOVE FORWARD?

Place Your Order With a Configuration Review

Submit the selected kit, delivery details and application information. A Depureco specialist reviews the configuration before the order is finalized.

Place your order

Your Order
Product, SKU, price, standard freight and order total will load automatically from this Commerce Kit.
Shipping currently available within the United States.
Review Your Order
Your product, quantity, standard freight, total and submitted details will be summarized here before submission.
Order verification required
No payment will be collected when you place this order. Depureco will verify the equipment configuration, application, shipping information, tax status, and any applicable safety or compliance requirements before processing. Special freight/accessorial charges may apply when required. All products are sold FOB Origin - Kyle, TX. We will contact you if clarification or changes are required and provide your final invoice and payment instructions after verification.

Need Help Finding the Right Solution?

Tell us what you’re collecting and how the equipment will be used. Our team can help match the right vacuum, filtration, collection method, accessories, or system configuration.

Contact Us

Request a free quote